Program Selection; Automatic Programs; Time Programs; Options - Bosch WTC82100US Operating, Care And Installation Instructions Manual

Program
selection
For optimum drying results your
dryer offers several program groups
and additional options.
Select the required drying program
from the program table according
to the examples (see page 23).

Automatic programs

There are automatic programs
for different types of textiles
(regular/cotton, permanent press).
Regular/Cotton
Permanent Press
The program sequence of
automatic programs is controlled
via sensors. The duration of the
program depends on the measured
degree of moisture in the laundry
and on the selected degree of
dryness (e.g. damp dry).

Time programs

Time programs run at specific
temperatures. Suitable for predried,
multi ply, delicate textiles or
individual small items. Also for
subsequent drying.
- Warm 60 min.
- Warm 40 min.
- Warm 20 min.
- Touch up

Options

Low heat
Press the Low heat button for
temperature sensitive textiles.
Observe the care information or
symbols on the textiles.
The temperature of the drying
process is reduced, the drying time
is extended.
i
For extreme temperature
sensitive textiles (e.g.
camisoles) press the Low heat
button to reduce the
temperature of the drying
process.
Easy Ironing
To prevent the laundry from
creasing, the dryer drum rotates
at specific intervals following the
drying program. Standard setting
for this function is 30 minutes.
If the Easy ironing button is
pressed, this function is extended
to 90 minutes.
The laundry remains loose and fluffy
until it is removed. The laundry
should be removed before the
wrinkle prevention period ends. This
would be within 30 minutes of the
end of the drying cycle, or within 90
minutes if the Easy ironing option
has been selected.

Program sequence

The dryer uses an electronic
scanning system for all programs
except the time programs.
A moisture sensor continuously
checks the moisture in the laundry.
Drying ends automatically as soon
as the selected degree of dryness
has been reached.
The drum continues to rotate at
specific intervals for one hour to
prevent creasing.
i
If the indicator light Wrinkle
block/End illuminates when
the program selector is in
Off Position - turn off the
circuit breaker and call for
customer service!
15