Alphasmart Neo Quick Manual page 8

C
ONNECTING
C o n n e c t i n g a S i n g l e N E O t o Y o u r C o m p u t e r
On Windows XP
computers, you may
be notified that the
driver is not certified for
Windows XP. The driver will
work for your system; to go on,
click Continue Anyway.
C o n n e c t i n g M u l t i p l e N E O s U s i n g a S m a r t O p t i o n M o b i l e
L a b
NEO Y
S TO OUR
1. Using the cable that came with NEO, connect the USB connector
your computer, and connect the square end
A
2. The first time you connect your NEO to a Windows computer, the
computer may notify you that it has found the hardware and installed the
driver. If a hardware wizard appears, follow the instructions in the wizard.
After installing AlphaSmart Manager, follow the SmartOption Mobile Lab
Setup instructions to connect the cart of NEOs to your computer using
AlphaHub.
C N E O
O N N E C T I N G S T O
Connecting a Single NEO to Your Computer
C
OMPUTER
B
C
Y C
O U R O M P U T E R
to
A
to your NEO at .
B C
6