Ap Mode - D-Link DIR-809 User Manual

Section 3 - Configuration

AP Mode

To switch to AP Mode, select it from the drop down box, configure the desired wireless
network settings and press the Save Settings button at the top of the page.
Upon pressing the Save Settings button, the following reboot confirmation warning will
be shown.
After clicking Reboot Now the following screen will appear indicating that the device
may be configured from the 192.168.0.50 IP address.
Note: While in AP Mode, the DIR-809's DHCP server is disabled and many configuration
options will be unavailable.
D-Link DIR-809 User Manual 34