Folding Rear Seats; Break-In Period - Mazda CX-3 Smart Start Manual

Seats

FOLDING REAR SEATS

Push the button to fold down the seatback.
NOTE:
Left rear seat release is shown.
Returning rear seats to upright position:
1 Install the headrest (if removed).
2 Raise seatbacks until they lock
into position.
3 Pull on the top of the seatbacks to
make sure they are locked.
4 Check that all seat belts are routed
properly for passenger use.

BREAK-IN PERIOD

No special break-in is necessary, but a few
precautions in the first 600 miles should
be observed.
• Do not race the engine.
• Do not maintain one constant speed, either
slow or fast, for a long period of time.
• Avoid full-throttle starts.
• Avoid unnecessary hard stops.
• Do not drive constantly at full-throttle or high
engine rpm for extended periods of time.
NOTE:
For tall drivers and front passengers who
adjust the front seats all the way back, the headrests
on the rear seats need to be removed when folding
the rear seatbacks down. If not removed, the rear
headrest will push into the front seatback. In order
to remove the headrest from the rear seat, the
seatback needs to be tilted slightly forward.
www.MazdaUSA.com
Unlocked
Locked
FUEL ECONOMY:
To achieve the
best fuel economy, visit
www.fueleconomy.gov
for more information.
6