Table of Contents
Advertisement
Main Menu
Table of Contents
Vents, Heating, and A/C
Airflow is divided between
the floor vents and the defroster
vents at the base of the windshield.
Air flows from the defroster
vents at the base of the windshield.
When you select
the system automatically switches to
Fresh Air mode and turns on the
A/C.
In AUTO mode, the system controls
the airflow direction automatically
between the dashboard vents and
the floor vents.
102
Ventilation
The flow-through ventilation system
draws in outside air, circulates it
through the interior, then exhausts it
through vents near the rear window.
1.
Set the temperature to the lower
or
,
limit.
2.
Make sure the A/C is off.
3.
Select
4.
Set the fan to the desired speed.
Using the Heater
The heater uses engine coolant to
warm the air. If the engine is cold, it
will be several minutes before you
feel warm air coming from the
system.
1.
Select
When you select
automatically switches to the fresh
air mode.
2.
Set the fan to the desired speed.
3.
Adjust the warmth of the air with
the temperature control dial.
and fresh air mode.
.
, the system
Using the A/C
Air conditioning places an extra load
on the engine. Watch the engine
coolant temperature gauge (see page
67
). If it moves near the red zone,
turn off the A/C until the gauge
reading returns to normal.
1.
Turn on the A/C by pressing the
button. The indicator in the button
comes on when a fan speed is
selected.
Make sure the temperature is set
2.
to maximum cool.
3.
Select
.
If the outside air is humid, select
4.
recirculation mode. If the outside
air is dry, select fresh air mode.
Set the fan to the desired speed.
5.
If the interior is very warm,
cool it down more rapidly by partially
opening the windows, turning on the
A/C, and setting the fan to
maximum speed in fresh air mode.
you can
Advertisement
Chapters
Table of Contents
