Setup Wizard - D-Link DSL-2900AL VIPER User Manual

Section 3 - Getting Started

Setup Wizard

If this is your first time installing the router, open your web browser and
enter http://dlinkrouter.local./ in the address bar. Alternatively, enter
the IP address of the router (default: http://192.168.1.1). Please refer to
Configuration on page 62.
The wizard is designed to guide you through a step-by-step process to
configure your new D-Link router and connect to the Internet.
Click Next to continue.
Ensure that your DSL phone cable is connected to both the router and
the wall jack.
Click Next to continue.
D-Link DSL-2900AL User Manual 12