Securing Workpiece - Makita SLIDE COMPOUND SAW LS1011N User Manual

2 1
1. Blade case
2. Arrow
3. Saw blade
4. Arrow
1
2
1. Elbow
2. Dust bag
3. Fastener
Return the blade guard and center cover to its original posi-
001787
4 3
tion. Then tighten the hex bolt clockwise to secure the center
cover. Lower the handle to make sure that the blade guard
moves properly. Make sure shaft lock has released spindle
before making cut.
Dust bag
002176
The use of the dust bag makes cutting operations clean and
dust collection easy. To attach the dust bag, insert the elbow
into the dust spout on the blade case and fit the bag's entry
port over the elbow.
When the dust bag is about half full, remove the dust bag
3
from the tool and pull the fastener out. Empty the dust bag of
its contents, tapping it lightly so as to remove particles adher-
ing to the insides which might hamper further collection.
NOTE:
If you connect a Makita vacuum cleaner to your saw, more
efficient and cleaner operations can be performed.

Securing workpiece

WARNING:
• It is extremely important to always secure the workpiece
properly and tightly with the vise. Failure to do so can
cause the tool to be damaged and/or the workpiece to
be destroyed. PERSONAL INJURY MAY ALSO RESULT.
Also, after a cutting operation, DO NOT raise the blade
until the blade has come to a complete stop.
13