Subaru 2001 Forester Service Manual page 23

Security and Locks
Symptom
The room light and ignition switch
illumination operation does not acti-
vate.
2. CHECK TRANSMITTER BATTERY
No.
1 CHECK TRANSMITTER BATTERY.
1) Remove the battery from the transmitter.
<Ref. to SL-45 REMOVAL, Keyless Transmit-
ter.>
2) Check the battery voltage. <Ref. to SL-45
INSPECTION, Keyless Transmitter.>
3. CHECK FUSE
S909345A1004
No.
1 CHECK FUSE.
Remove and visually check fuse No. 2 (in the
main fuse box), No. 3 (in the fuse and relay
box) and SBF-6 (in the main fuse box)
KEYLESS ENTRY SYSTEM
Repair order
1. Check the transmitter battery.
2. Check the room light operation.
3. Check the ignition switch illumination circuit.
4. Check the key warning switch.
5. Check the door switch.
6. Replace the keyless entry control module.
S909345A1011
Step
Is the battery voltage OK?
Step
Is the fuse blown? (15 A
and 30 A)
SL-22
<Ref. to SL-22 CHECK TRANSMIT-
TER BATTERY, INSPECTION, Key-
less Entry System.>
<Ref. to SL-26 CHECK ROOM
LIGHT OPERATION, INSPECTION,
Keyless Entry System.>
<Ref. to SL-26 CHECK IGNITION
SWITCH ILLUMINATION CIRCUIT,
INSPECTION, Keyless Entry Sys-
tem.>
<Ref. to SL-24 CHECK KEY WARN-
ING SWITCH, INSPECTION, Keyless
Entry System.>
<Ref. to SL-24 CHECK DOOR
SWITCH, INSPECTION, Keyless
Entry System.>
<Ref. to SL-44 Keyless Entry Control
Module.>
Check Yes
Further inspection
is necessary, refer
to "SYMPTOM
CHART". <Ref. to
SL-21 SYMPTOM
CHART,
INSPECTION,
Keyless Entry
System.>
Check Yes
Replace the fuse
with a new one.
Reference
No
Replace the trans-
mitter battery.
No
Check power sup-
ply and ground
circuit. <Ref. to
SL-23 CHECK
POWER SUPPLY
AND GROUND
CIRCUIT,
INSPECTION,
Keyless Entry
system.>