Samsung 650 User Manual page 112

Turning the TV On and Off e C a
Press the POWER button on the remote control.
You can also use the POWER button on the TV.
Your TV can memorize and store all of the available channels
for both air and cable channels. After the available channels
are memorized, use the CH
6
or CH
(3
button to scan
through the channels. This eliminates the need to change
channels by entering the channel digits. There are three
steps for memorizing channels: selecting a broadcast source,
memorizing the channels (automatic) and adding and deleting
channels (Channel Lists).
V"ewing the Displays and
Viewing the Display
enus
Storing Channels in emory
( utomatic ethod)
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV (Le. an Air or a Cable system).
Viewing the Menus
II
Press the INFO button on the remote control.
The TV will display the channel, the type of sound,
and the status of certain picture and sound settings.
With the power on, press the MENU button.
The main menu appears on the screen. The menu's
left side has icons: Picture, Sound, Channel,
Setup, Input, Application.
\l
n
. Mode : Standard
C
CD
,..
Contrast 80
\
.
Bnghtness 45
\
Sharpness 50
~
Color 50
Tint (G/R) G50/R50
.; Detailed Settings
r.-41
Picture Options
Press the A or " button to select one of the icons.
Then press the ENTER button to access the icon's
sub-menu.
Press the EXIT button to exit.
)..-- It takes about one mmute until the on-screen
menu disappears
English· 8
Press the MENU button to display the menu.
Press the A or " button to select Channel, then
press the ENTER button.
Press the A or " button to select Auto Program,
then press the ENTER button.
Press the A or " button to select an antenna
connection, then press the ENTER button.
,- Air: Air antenna signal.
Cable. Cable antenna signal.
Auto: Air and Cable antenna signals.