Dynex DX-CR112 Quick Setup Manual

Package contents
• Memory Card Reader
• Quick Setup Guide
System requirements
• Windows XP, Windows Vista, Windows 7, or Mac OS 10.4.x or higher.
Features
• Easily transfer music, photos, video, and other files between your computer and a
DX-CR112
6-in-1 Memory Card Reader
• Supports SD™, SDHC™, SDXC™, MultiMediaCard, microSDHC, microSD™, and
Lecteur de carte mémoire 6-en-1
• Plug & Play: no drivers required
Lector de tarjetas de memoria 6 en 1
• USB 2.0 compatible
Data LED indicator
To access a memory card using Windows:
Témoin DEL de données
1 Plug the memory card reader into an open USB port on your computer. Your
Indicador LED de datos
2 Insert a card into the appropriate slot. The blue LED lights.
3 Click Start, then click My Computer/Computer. Double-click the drive for the card
4 To access files and folders on the memory card, use normal Windows procedures
microSD/microSDHC
5 When you are done working with the files on the memory card, right-click the
USB connector
MMC/SD/SDHC/
Connecteur USB
SDXC/MMCplus
Conector USB
QUICK SETUP GUIDE / GUIDE D'INSTALLATION RAPIDE /
GUÍA DE INSTALACIÓN RÁPIDA
digital camera, PDA, cell phone, or MP3 player.
MMCplus.
computer will install the driver automatically.
Caution: To avoid damage to the card and/or card reader, insert the card into the
correct slot and in the correct direction. Insert cards into the microSD slot label
side DOWN. Insert cards into the SD slot label side UP.
reader.
for opening, copying, pasting, or deleting files and folders.
memory card drive in My Computer/Computer, then select Eject. The blue data LED
on the memory card reader turns off after the card is ejected. Remove the card
from the reader.
Caution: Do not remove memory cards while the blue data LED on the reader is
flashing. Doing so may result in loss of data or damage to your memory card.
To access a memory card using Macintosh OS 10.4.x or higher:
1 Plug the memory card reader into an open USB port on your Mac.
2 Insert a card into the appropriate slot. A new drive icon appears on the desktop.
Caution: To avoid damage to the card and/or card reader, insert the card into the
correct slot and in the correct direction. Insert cards into the microSD slot label side
DOWN. Insert cards into the SD slot label side UP.
3 Double-click the new memory card icon. Use normal Mac procedures for opening,
copying, pasting, or deleting files and folders.
4 When you have finished working with the files on the memory card, drag the disk
icon to the Eject icon or click the memory card icon on the desktop and select
Eject. Then remove the card from the reader.
Caution: Do not remove memory cards while the blue data LED on the reader is
flashing. Doing so may result in loss of data or damage to your memory card.
Troubleshooting
Visit www.dynexproducts.com for details.
WE ARE GOING GREEN!
A copy of your User Guide is not provided
in the box but is available online.
Go to www.dynexproducts.com, click
Support & Service. Enter your model number
in the Search field, then press Enter.
Click Support/Downloads.
Legal notices
FCC Information
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
ICES-003 statement
This Class B digital apparatus complies with Canadian ICES-003;
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
One-year limited warranty
Visit www.dynexproducts.com for details.
For additional information, see the online User Guide.
Contact Dynex
For customer service call 1-800-305-2204
www.dynexproducts.com
© 2012 BBY Solutions, Inc. All Rights Reserved. DYNEX is a trademark of BBY Solutions, Inc.
Registered in some countries. All other products and brand names are trademarks of their
respective owners.
Contenu de l'emballage
• Lecteur de carte mémoire
• Guide d'installation rapide
Configuration système requise
• Windows XP, Windows Vista, Windows 7 ou Mac OS 10.4.x ou supérieur
Caractéristiques
• Facilite le transfert de musique, photos, vidéo et d'autres fichiers entre un
ordinateur et un appareil photo numérique, un ANP, un téléphone cellulaire
ou un lecteur MP3.
MC MC
• Compatible avec les cartes SDMC, SDHC , SDXC , MultiMediaCard, microSDHC,
microSD MC et MMCplus
• Prêt à l'emploi : aucun pilote n'est nécessaire
• Compatible USB 2.0
Pour accéder à une carte mémoire sous Windows :
1 Brancher le lecteur de cartes mémoire sur un port USB de l'ordinateur.
L'ordinateur installera le pilote automatiquement.
2 Insérer une carte dans la fente appropriée. La DEL bleue s'allume.
Attention : Pour éviter d'endommager la carte ou le lecteur de carte, insérer la
carte dans la fente appropriée et dans le bon sens. Insérer les cartes dans la fente
MicroSD avec l'étiquette tournée vers le BAS. Insérer les cartes dans la fente SD
avec l'étiquette tournée vers le HAUT.
3 Cliquer sur Start (Démarrer), puis sur My Computer/Computer (Poste de
travail/Ordinateur). Double-cliquer sur le lecteur correspondant au lecteur de cartes.
4 Pour accéder aux fichiers et dossiers de la carte mémoire, utiliser les procédures
normales de Windows pour ouvrir, copier, coller ou supprimer des fichiers et des
dossiers.
5 Quand les travaux sur les fichiers de la carte mémoire sont terminés, cliquer avec
le bouton droit de la souris sur le lecteur de carte mémoire dans My
Computer/Computer (Poste de travail/Ordinateur), puis sélectionner Eject (Éjecter).
La DEL témoin du lecteur de cartes mémoire s'éteint dès que la carte est éjectée.
Retirer la carte du lecteur.
Attention : Ne pas retirer les cartes mémoire tant que la DEL bleue de données
du lecteur clignote. Sinon, une perte de données peut en résulter et la carte
mémoire pourrait être endommagée.