Safety Settings; Show Poi On Map - TomTom Mazda NB1 Reference Manual

Replanning settings
Note: This setting is only available if your device has either a traffic subscription or an
RDS-TMC Receiver. Traffic information is not available in all countries or regions. For more
information about TomTom traffic information services, go to tomtom.com/services.
Set whether you want your Mazda NB1 to replan the current route if a faster route is found while
you are driving. This is useful if traffic builds up or clears further ahead on your route. Choose
from the following settings:
Always switch to that route - select this option to receive no messages when a faster route is

found. The current route is automatically re-calculated to be the fastest one.
Ask me if I want that route - select this option to be asked if you want to take the new route.

When asked if you want to take the alternative route, tap Yes to have the current route
re-calculated as the fastest one. Tap No if you don't want to take alternative route.
Tap Info to see a summary of both the original and the alternative routes. You can then tap
Done to take the fastest route or Current route to remain on your original route.
Never change my route - select this option to receive no messages and simply be shown the

new route on the screen.
Map information settings
Set whether you want to be warned if your route passes through an area where your map con-
tains only limited information.
Toll road, ferry, carpool lanes and unpaved road settings
Set how your Mazda NB1 should manage each of these four road features when the device
calculates a route.
Carpool lanes are sometimes known as High Occupancy Vehicle Lanes and are not present in
every country. To travel on these lanes, you may need to have more than one person in the car,
for example, or the car may need to use environmentally-friendly fuel.
Route summary
Set whether you want the route summary screen to close automatically after you plan a route. If
you select No, then you will need to tap Done to close the route summary screen every time you
plan a route.

Safety settings

Safety settings

Show POI on map

Show POI on map
Tap this button to select the safety features you want to use on your
device.
Tap this button to select the types of Point of Interest (POI) you want to
see on the map.
1. Tap Show POI on map in the Settings menu.
2. Select the POI categories you want to be shown on the map.
47