Danby DAC080ECB2GDB Owner's Use And Care Manual page 17

OPERATING INSTRUCTIONS
USING THE REMOTE CONTROLLER BUTTONS
Model / Modèle :
R15B
1
Model / Modèle :
R15B
TIMER OPERATION
To set the Auto-stop time
1. Push the TIMER button when the unit is operational; only the Auto-stop feature can
be set.
2. Keep pressing the + and - button. Each time pressed will increase the selected time
by 0.5 hour increments for the fi rst 10 hours and then by 1 hour increments up to 24
1
hours.
3. The time can be set in a range of 0-24 hours.
4. After the desired time has been selected, wait for about 10 seconds, until the setting
temperature reappears in the display window of the air conditioner. This indicates that
the program has been set.
NOTE:
To cancel the TIMER setting, push the + or - button until "0 hours" is displayed on the
LCD window of the air conditioner.
-----------------------------------------------------------------------------------------------------------------------
ENERGY SAVER OPERATION
This function is available in Cool, Dry, and Auto modes (only Auto-Cool and Auto-Fan
modes). The fan will continue to run for 3 minutes after the compressor has shut off. The
fan then cycles on for 2 minutes at 10 minute intervals, until the room temperature is
above the set temperature. At this point, the compressor turns back on and cooling starts.
-----------------------------------------------------------------------------------------------------------------------
13