Samsung UA40JU6400 E-Manual page 154

Using Anynet+ (HDMI-CEC)
Selecting an external device
After connecting external devices to the TV, select (MENU/123)
CEC) Search for Devices. The TV displays a list of Anynet+ (HDMI-CEC)-compliant devices that you
can set up as Anynet+ (HDMI-CEC)-enabled devices (i.e., devices that can be controlled with the TV's
remote control). To set up an Anynet+ (HDMI-CEC)-compliant device as an Anynet+ (HDMI-CEC)-
enabled device, you must select it on the Source screen. Follow the instructions in the next section.
Accessing the menu of the external device
1.
Press the SOURCE
down directional button.
2.
Select Anynet+ (HDMI-CEC)
(HDMI-CEC)-enabled device. The following menu options are available.
"
The menu options available in the pop-up menu may differ with the external device.
●
Anynet+ (HDMI-CEC)
Sets up the selected device as an Anynet+ (HDMI-CEC)-enabled device and then displays a list
of Anynet+ (HDMI-CEC)-compliant devices connected to the TV. Select
(HDMI-CEC), and start watching TV.
button on the remote control. On the
from the Tools
MENU
Source
list. The selected device is set up as an Anynet+
System Anynet+ (HDMI-
screen, select the device and the
View TV to exit Anynet+