Honeywell Wi-Fi VisionPRO8000 Installation Manual page 5

Performing installer setup
Setup options define the type of system you are installing and preferences for the
display.
1 Follow prompts on the screen to select the appropriate options. Among the
screens you might see wil be options for:
1.1 Application, either Residential or
Commercial.
1.2 Thermostat Name, which will enable
you to identify it if you're installing more
than one thermostat (for a zoned HVAC
application, for instance).
1.3 Thermostat Type, either programmable
or not, depending on preference.
1.4 Temperature scale, either Fahrenheit or
Celsius.
1.5 Any Outdoor Air Sensors installed.
NOTE: If you are using a Wired Outdoor
Sensor or the outdoor temperature from the
Wi-Fi connection to lockout the compressor
or Auxiliary heat, select
installer options for lockout temperatures.
1.6 The type of heating system.
1.7 For all installer options, press the
buttons to change the option.
t
1.8 Press
Yes
to see the
Next
to move to the next setting, and
TEMPERATURE SCALE
or
s
Done
when setup is complete.
5
APPLICATION
residential
THERMOSTAT NAME
THERMOSTAT
THERMOSTAT TYPE
programmable
fahrenheit
OUTDOOR AIR
SENSOR: no
HEATING SYSTEM
conv. forced air
M35356
M34150
M35357
M35358
M35359