Auto Door Locks; Driving Position Memory System (Dpms) - Acura 2014 RLX SPORT HYBRID Advanced Technology Manual

A u t o D o o r L o c k s
Program how and when the vehicle doors automatically lock and unlock.
H o w I t W o r k s
D e f a u l t L o c k S e t t i n g
The doors are preset to lock
when your vehicle reaches
about 10 mph.
C h a n g i n g S e t t i n g s
Follow the steps below to change your door settings. Make sure you are using
the key you want to change settings for (Driver 1 or Driver 2). See your Owner's
Manual for complete setting options.
Note: The driver's and front passenger's door can be opened by pulling the inner front
door handle, regardless of the setting. Changing the setting to "All Doors" is useful for
unlocking the rear doors when either inner front door handle is pulled.
16
10
D e f a u l t U n l o c k S e t t i n g
All doors are set to unlock when
the driver's door is opened.
1. Press SETTINGS. Use the
interface dial to make and
enter selections.
2. Select Vehicle Settings.
3. Select Auto Door Lock or
Auto Door Unlock.
4. Select from the options.
5. Press BACK to exit the menu.
You can also change these settings using
the multi-information display (see page 10).
D r i v i n g P o s i t i o n M e m o r y S y s t e m ( D P M S )
Store driver's seat, outside mirror, and steering wheel positions into memory for each
corresponding keyless remote transmitter (1 or 2).
P r o g r a m m i n g t h e D P M S
1. Turn on the vehicle. Make sure
Park (P) is selected.
2. Adjust the seat, outside mirror,
and steering wheel to your
preferred positions.
Notes:
• Once set, stored positions can be recalled by pressing one of the memory buttons
(1 or 2) on the door.
• Lumbar position cannot be stored.
3. Press SET. You will hear a beep.
4. Press the memory button
corresponding to the remote
(1 or 2) you are using within 5
seconds. You will hear two beeps.
17
9