1. Manuals
  2. Brands
  3. Corega Manuals
  4. Modem
  5. DSLAAU
  6. User manual

Corega DSLAAU User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DSLAAU
USB ADSL Modem

User Manual

Advertisement

Table of Contents
loading

Summary of Contents for Corega DSLAAU

  • Page 1: User Manual

    DSLAAU USB ADSL Modem User Manual...

  • Page 3: Table Of Contents

    Preface DSLAAU Manual 1. Overview ................1.1 About ADSL ......... 1.2 Protocol and Device Driver Selection ................1.3 Features 2. Hardware Installation ..............2.1 Before you start ..........· Hardware Installation 3. Software Installation ..............8 3.1 Before you start .............9...
  • Page 4 • Establishing a Connection Appendix B: Point-to-Point Protocal over Ethernet ........PPPoE for WAN Applications ........PPPoE for LAN Applications Appendix C: Specifications ........... • corega DSLAAU Connector ..............• Data Transfer Rates ............. • Power Requirements ............• System Requirements ............
  • Page 5 The following chapters are included in this manual: Chapter 1: • “Overview” offers a brief description of ADSL, protocol and device driver selection, and the features of corega DSLAAU. Chapter 2: • “Hardware Installation” describes the steps for connecting corega DSLAAU.

  • Page 6: Overview

    ITU G.992 Annexes A, B, and C as applicable. 1.2 Protocol and Device Driver Selection corega DSLAAU can be easily connected to a USB port on the PC via a standard USB cable. corega DSLAAU is fully software upgradeable so that new features and updates may be added by simply loading a new version of the device driver onto your PC.
  • Page 7 DSLAAU Manual Windows 2000, Windows Me, and Windows XP, MAC OS 9.x (RFC 2364 only), MAC OS X 10.1.x and above (RFC 2364 only), as well as Linux. 2. LAN driver - This driver makes the modem appear as a LAN or Ethernet device.

  • Page 8: Features

    DSLAAU Manual 1.3 Features corega DSLAAU provides the following features: • Compliant with Universal Serial Bus Specification Revision 1.1 • USB bus-powered; an external power supply is not required • Supports two device drivers: Microsoft NDIS 4.0 WAN Miniport and NDIS 4.0 LAN Miniport...

  • Page 9: Hardware Installation

    Install corega DSLAAU by following steps with the PC running: 1. Insert the rectangular end of a USB cable into the USB port of your 2. Insert the square end of the USB cable into the USB port of corega DSLAAU.

  • Page 10: Software Installation

    Software Installation DSLAAU Manual The software installation procedures vary depending upon the oper- ating system of your PC. Be sure to follow the instructions provided for the operating system appropriate for you. 3.1 Before you start… The following information may be required for software installation.

  • Page 11: Windows Installation

    The software setup process for Microsoft Windows applications (XP, 2000, Me, 98 SE, and 98) is described below with operating system specific differences noted. corega DSLAAU should be connected to your PC prior to installing the driver software. No other Windows programs should be running on your PC during the software install process.
  • Page 12 DSLAAU Manual 4. A window may be displayed which allows you to specify the location of the driver software to be installed. If so, point to the Device Driver Folder (See Step 1) with no other options selected and click Next>. A message will indicate that the system is ready to install the device driver;...
  • Page 13 DSLAAU Manual • If your DSL service provider is listed and you would like to accept the default values, highlight the provider’s name and click Next>. Continue with Step 9. • If your DSL service provider is listed and you would like to change the default values, highlight the provider’s name and click <Cus-...
  • Page 14 DSLAAU Manual b) Enter/Select the VPI, VCI, Encapsulation type and Modulation type from the “Communication Settings” window and click Next>. 12 12...
  • Page 15 11.The system must be rebooted to have the new settings take effect, therefore the “Reboot” window will appear. Remove all disks from their drives, select <Yes>, reboot the computer now; and click <Close> to reboot. 12. Once the PC has rebooted, installation of corega DSLAAU is complete.

  • Page 16: Mac Os 9.X Installation

    Click <Finish>. 3.3 MAC OS 9.x Installation When installing corega DSLAAU on a Macintosh running OS 9.x, you will need to install the drivers first, and then plug the USB cable from your modem to the computer.

  • Page 17: Mac Os X Installation

    DSLAAU Manual 3.4 MAC OS X Installation When installing corega DSLAAU on a Macintosh running OS X, you will need to install the drivers first, then plug the USB cable from your modem to the computer. * Note: This device driver supports MAC OS X 10.1.x and above. It does not support MAC OS X 10.0.
  • Page 18 <Restart now> (click inside the radio button to the left of it) and click <Finish>. The driver is now installed. Before using your corega DSLAAU, con- nect the modem to the computer using the proper USB device cable and connect the DSL line to corega DSLAAU.

  • Page 19: Customizing Communication Settings

    Once corega DSLAAU and software have been installed, the commu- nication settings may be easily updated by performing the following steps: 1. From your PC desktop click Start => Programs => Corega USB ADSL Modem => Configure. 2. The “Communication Settings” window will be displayed.

  • Page 20: Updating Software

    Updating Software DSLAAU Manual 5.1 Windows Drivers Update Once corega DSLAAU has been installed, updating to a new version of the software is an easy process. Simply uninstall the existing driv- ers (See“Windows Uninstall”section), and then install the new drivers (See “Chapter 3: Software Installation”...

  • Page 21: Software Uninstall

    * Note: The USB cable should not be unplugged until you are prompted to do so. 1. From your PC desktop click Start => Programs => Corega USB ADSL Modem => Uninstall. 2. A message will be displayed asking you to confirm the removal of corega DSLAAU software, click <Yes>.

  • Page 22: Mac Os X Uninstall

    Select <Restart now> and click <Finish>. 6.3 MAC OS X Uninstall 1. Invoke the Uninstaller from corega DSLAAU folder (Go => Applications => Corega USB ADSL Modem => Uninstall). 2. The “Uninstall” screen will appear. Select <Yes>, remove the software from my computer and click <Next>.
  • Page 23 DSLAAU Manual 3. Type the administrator name and password at the “Authenticate” screen and click <OK>. 4. The “Finish” screen will appear.The computer must be restarted to complete the uninstall process. Select Restart now and click <Finish>.

  • Page 24: Wan Usb Driver

    Appendix A DSLAAU Manual Modifying TCP/IP Networking Options WAN USB Driver • Microsoft Windows XP TCP/IP settings are set up automatically during the software installation process.The following procedure may be used to change TCP/IP settings, if necessary. 1. From your PC desktop, open the “Control Panel” window (Start =>...
  • Page 25 DSLAAU Manual 4. From the “Networking” tab of the “ Dial-Up PPP Connection Properties” window, select Internet Protocol (TCP/IP) and click <Properties>. 23 23...
  • Page 26 DSLAAU Manual 5. Use the “Internet Protocol (TCP/IP) Properties” window to modify the IP address and DNS Server addresses as follows: • Change the IP address to a user defined address by selecting Use the following IP address (click inside the radio button to the left of it) and typing the address in the space provided •...

  • Page 27: Microsoft Windows 2000

    DSLAAU Manual Microsoft Windows 2000 TCP/IP settings are set up automatically during the software installation process.The following procedure may be used to change TCP/IP settings, if necessary. 1. From your PC desktop, open the “Control Panel” window (Start => Settings => Control Panel). Double click the <Network and Dial-Up Connections>...
  • Page 28 DSLAAU Manual 5. Use the “Internet Protocol (TCP/IP) Properties” window to modify the IP address and DNS Server addresses as follows: 26 26...

  • Page 29: Microsoft Windows Me

    DSLAAU Manual • Change the IP address to a user defined address by selecting Use the following IP address (click inside the circle to the left of it) and typing the address in the space provided • Change the DNS Server addresses to user defined addresses by...
  • Page 30 DSLAAU Manual 3. From the “Networking” tab of the “ Dial-Up PPP Connection” window, select TCP/IP (marked with a check in the check-box to the left) and click <TCP/IP Settings>. 28 28...
  • Page 31 DSLAAU Manual 4. Use the “TCP/IP Settings” window to modify the IP address, Name Server addresses and/or default gateway as follows: • Change the IP address to a user defined address by selecting Specify an IP address (click inside the circle to the left of it) and typing the address in the space provided.

  • Page 32: Microsoft Windows 98 And Windows 98 Se

    DSLAAU Manual Microsoft Windows 98 and Windows 98 SE TCP/IP settings are set up automatically during the software installation process.The following procedure may be used to change TCP/IP settings, if necessary. 1. From your PC desktop, open the “Control Panel” window (Start =>...
  • Page 33 DSLAAU Manual • Change the IP address to a user defined address by selecting Specify an IP address (click inside the radio button to the left of it) and typing the address in the space provided • Change the Name Server addresses to user defined addresses by...
  • Page 34 DSLAAU Manual MAC OS 9.x If you have not done so yet, connect corega DSLAAU to the computer using the proper USB device cable. Connect the DSL line to corega DSLAAU, too. TCP/IP settings are set up automatically during the software installa- tion process.The following procedure may be used to change TCP/IP...
  • Page 35 DSLAAU Manual • Make sure that PPP is selected in the Connect via: drop-down list. • The Configure: drop-down list should show Using DHCP Server. 6. Close the “TCP/IP” window.You will be prompted to save the current configuration. Click <Save>.
  • Page 36 DSLAAU Manual * Note: If you do not see the Name and Password fields, click on the small triangle to the left of the word Setup. • Enter your userid in the Name field. • Type in your password in the Password field.
  • Page 37 DSLAAU Manual MAC OS X If you have not done so yet, connect corega DSLAAU to the computer using the proper USB device cable. Connect the DSL line to corega DSLAAU, too. TCP/IP settings are set up automatically during the software installa- tion process.The following procedure may be used to change TCP/IP...
  • Page 38 DSLAAU Manual 3. From the Show pull down menu, select the new port, USB-ADSL Modem. 36 36...
  • Page 39 DSLAAU Manual 4. Select the <Modem> tab. In the Modem pull down menu, select ADSL USB Modem. Uncheck Wait for dial tone before dialing. Check Show Modem Status in menu bar. 5. Select the <PPP> tab. Enter your username (account name). If you want to make your password permanently saved, enter it and check Save password.

  • Page 40: Establishing A Connection

    DSLAAU Manual 6. Select the <TCP/IP> tab and select the way you would like to obtain your IP address. The recommended way is Configure Using PPP. 7. Click <Apply Now>. Close the System Preferences application. The installation and configuration is now complete.

  • Page 41: Lan Usb Driver

    DSLAAU Manual 3. The Internet Connection application will display the progress of the connection. Upon completion, you will be connected to the Internet. The Disconnect button may be used to remove the connection, effectively disconnecting from the Internet. LAN USB Driver •...
  • Page 42 DSLAAU Manual 4. The “Internet Protocol (TCP/IP) Properties” window is used to modify the IP addresses and DNS Server addresses as follows: 40 40...

  • Page 43: Microsoft Windows 2000

    DSLAAU Manual • Change the IP address to a user defined address by selecting Use the following IP address option (click inside the circle to the left of it) and typing the addresses in the spaces provided • Change the DNS Server addresses to user defined addresses by...
  • Page 44 DSLAAU Manual 4. Use the “Internet Protocol (TCP/IP) Properties” window to modify the IP addresses and DNS Server addresses as follows: 42 42...

  • Page 45: Microsoft Windows Me

    DSLAAU Manual • Change the IP address to a user defined address by selecting Use the following IP address option (click inside the circle to the left of it) and typing the addresses in the spaces provided • Change the DNS Server addresses to user defined addresses by...
  • Page 46 DSLAAU Manual 3. From the “IP Address” tab of the “TCP/IP Properties” window, select either the Obtain an IP address Automatically or Specify an IP Address option, depending on your network setup. If you select Specify an IP address, type the IP Address and Subnet Mask in the spaces provided.
  • Page 47 DSLAAU Manual 4. The “Gateway” tab allows you to add or remove gateways. Consult with your network administrator to determine the appropriate addresses for your individual needs. • To add a new gateway, type the address in the New gateway field and click <Add>.The new gateway will appear in the Installed...

  • Page 48: Microsoft Windows 98 And Windows 98 Se

    1. From your PC desktop, open the “Control Panel” window (Start => Settings => Control Panel). Double click the <Network> icon. 2. Highlight TCP/IP -> corega DSLAAU from the list of installed network components in the “Configuration” tab of the “Network”...
  • Page 49 PC. Click <Yes>, and your PC will restart. MAC OS 9.x If you have not done so yet, connect corega DSLAAU to the computer using the proper USB device cable. Connect the DSL line to corega DSLAAU, too.
  • Page 50 3. Close the “TCP/IP” window.You will be prompted to save the current configuration. Click <Save>. MAC OS X If you have not done so yet, connect corega DSLAAU to the computer using the proper USB device cable. Connect the DSL line to corega DSLAAU, too.
  • Page 51 DSLAAU Manual 2. A window should pop up indicating that a new port has been detected. It will be a port of type “Ethernet Adapter” and its interface name “en(2)” will be displayed as well, e.g.,“Ethernet Adapter en<n>.” Click <OK>.
  • Page 52 DSLAAU Manual 4. The next steps apply if you want to configure using PPPoE (RFC 2516). 5. Select the PPPoE tab and select Connect using PPPoE. 6. Select the TCP/IP tab and select the way you would like to obtain your IP address.

  • Page 53: Establishing A Connection

    DSLAAU Manual 7. If indicated by your ISP, enter any proxies needed at the Proxies tab. 8. Click <Apply Now> to apply the changes. Close the System Preferences application. The installation and configuration is now complete. Establishing a Connection •...
  • Page 54 DSLAAU Manual provided in Step 5 above; click <Connect>. 3. The Internet Connection application will display the progress of the connection. Upon completion, you will be connected to the Internet. The Disconnect button may be used to remove the connection, effectively disconnecting from the Internet.

  • Page 55: Pppoe For Wan Applications

    Ethernet protocol, which supports multiple users in a local area network.The PPP Protocol information is encapsulated within an Ethernet frame. corega DSLAAU supports PPPoE for WAN and LAN applications, as presented in this section. PPPoE for WAN Applications •...
  • Page 56 PPPoE software.The third party soft- ware will search for existing drivers. If multiple drivers are installed, select corega DSLAAU as the adapter of choice. Internet connection will be made through the third party software. You will be required to enter your User Name and Password.

  • Page 57: Corega Dslaau Connector

    DSLAAU Connector • corega DSLAAU is connected to your PC via a USB cable. The rectan- gular end of the USB cable inserts into the USB port of your PC while the square end of the cable inserts into the USB port of corega DS- LAAU.

  • Page 58: Power Requirements

    DSLAAU Manual Table 2: G.992.2 Payload Bit Rates Bit Rate (kb/s) Downstream 4000 Upstream 1024 Power Requirements • Typical Power Consumption Table 5: CP USB Modem Power Consumption CP USB Modem Power Consumption Power Supply Data Mode +5V Digital 0.100 W +5V Analog 0.250 W...

  • Page 59: Hardware Requirements

    DSLAAU Manual MAC Operating System • MAC OS 9.x, OS X (10.1.x and above; 10.0 is not supported) • Requires Macintosh USB driver version 1.2 or greater • Supports iMac/iBook (G3/G4), PowerMac/PowerBook (G3/G4) Linux Operating System • 32 MB RAM •...
  • Page 60 Established in 1986, corega 100% founded by Allied Tel- esis Group in Yokohama, Japan. corega’s core products consists of 10/100/1000 Ethernet products, Wireless Networking Products(802.11 a/b/g series), broadband...
  • Page 62 Taiwan Inc. 7F., No. 10, Lane 345,YangGuang St. Nei-Hu Chiu, Taipei City 114, Taiwan R.O.C. TEL: +886-2-8751-9164 FAX: +886-2-8751-9174 PN： T30-EM6101-00 Rev.B...

Table of Contents