Assembling The Front Wheel; Installing The Front Wheel - Yamaha XV16AL Service Manual

4
FRONT WHEEL AND BRAKE DISCS
NOTE:
Tighten the brake disc bolts in stages and in
a crisscross pattern.
d. Measure the brake disc deflection.
e. If out of specification, repeat the adjust-
f. If the brake disc deflection cannot be
▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲
EAS00539

ASSEMBLING THE FRONT WHEEL

1. Install:
Do not contact the wheel bearing inner
race 1 or balls 2. Contact should be made
only with the outer race 3.
NOTE:
Use a socket 4 that matches the diameter
of the wheel bearing outer race and oil seal.
EAS00544

INSTALLING THE FRONT WHEEL

The following procedure applies to both
brake discs.
1. Lubricate:
4 - 7
Brake disc bolt
23 Nm (2.3 m • kg, 17 ft • lb)

LOCTITE
ment steps until the brake disc deflection
is within specification.
brought within specification, replace the
brake disc.
• wheel bearings
• oil seals
New
Install the new wheel bearings and oil
seals in the reverse order of disassem-
bly.
CAUTION:
ACHTUNG:
• wheel axle
• oil seal lips
Recommended lubricant
Lithium soap base grease
CHAS