Control Buttons - Dell E207WFP Service Manual

20" LCD Color Monitor

3.2 Control Buttons

Input select
A
B
OSD menu / select
C
Brightness/Contrast Hot Key
C, D
Down (-) and Up (+)
Use the Input Select button to select between two different video signals
that may be connected to your monitor.
NOTE: The floating 'Dell Self-test Feature Check' dialog appears on
a black background if the monitor cannot sense a video signal. Depending
upon the selected input, one of the dialogs shown below will scroll
continually.
NOTE: If one of the DVI or VGA cable is removed, the display will
automatically switch to the other input source where the cable is still
connected.
The Menu button is used to open and exit the on-screen display (OSD),
and exit from menus and sub-menus. See Using the OSD Menu.
Use this button for direct access to the "Brightness" and "Contrast" control
menu.
Use these buttons to adjust (decrease/increase ranges) items in the OSD
menu.
NOTE: You can activate automatic scroll feature by pressing and
holding either + or - button.
7
Dell E207WFP