Tapco SD5-1 Operating Instructions

Operating Instructions for the Dräco
Metal-Shear SD5-1 and S1001N-1
To avoid any disturbance, please read the following instructions:
F O R Y O U R S A F E T Y :
1 2
1
Safe operation of this machine is only possible when the
operating instructions and the safety precautions are
read completely and the instructions contained therein
are strictly observed.
2
The machine must not be used or operated in a damp or a
wet environment.
3
Always inspect the cable and plug before using machine.
Damage must only repaired by a qualified professional. The
plug should only be placed into the main socket when the
machine is in the off position.
4+5 Always wear protective goggles, protective gloves and
heavy-duty shoes when working.
F
F or further notes on safety please refer to the red safety leaflet
enclosed in the tool box.
DRÄCO metal shears
max. cutting capacity
steel 400 N/mm²
stainless steel 600 N/mm²
stainless steel 800 N/mm²
aluminium 250 N/mm²
tightest radius
working speed
strokes
motor capacity
weight
all units are ready to use
OPERATIONS MANUAL
3
SD5-1 S1001N-1
mm/ga. 1.0 / 19 1.3 / 18
mm/ga. 0.7 / 21 1.0 / 19
mm/ga. 0.4 / 24 0.7 / 21
mm/ga. 1.5 / 16 2.0 / 14
mm/ga. 50 100
± m/min 5-9 5-9
min -1 3900 3900
Watt 300 300
kg 1.6 1.6
4 5
l Do not carry the machine by the cable.
l Always remove the plug from the power supply socket
before carrying out any work on the machine, during work
interruptions or when not using the machine.
l Always place the cable to the rear, away from the machine.
l Apply the machine to the sheet metal only, when switched on.
l Always provide for secure footing when working.
l Firmly clamp the work piece if it does not remain stationary
from its own weight.
l The knife should not rub on the jaws as there is a possible
danger of breaking the cutting tool.
l Do not exceed the maximum allowable material thickness,
especially when cutting over double folded joints or welded
seams.
SD5-1
spare parts
knife 01011 knife
set of jaws BG13574/1 set of jaws
knife-pin set BG12555
optional accessories
metal-box
adjustable guide S/01 up to 100mm
adjustable guide S/01 up to 250mm
adjustable guide S/01 up to 500mm
support roller
BG=Set
Valid 10/2002
S1001N-1
spare parts
01001
BG10600
18000
10059
10060
10061
BG10076
other voltages available