MSI Z97 GAMING 3 Manual page 102

■ Reset Disks to Non-RAID
Select option 3 Reset Disks to Non-RAID and press <Enter> to delete the RAID
volume and remove any RAID structures from the drives. The following screen
appears:
1. Create RAID Volume
2. Delete RAID Volume
RAID Volumes :
None defined.
Port Drive Model
Physical Devices :
1
Port Device Model
2
1 XXXX-XXXXXXXX
2 XXXX-XXXXXXXX
[ ↑↓] - Previous/ Next
[ ↑↓] - Select
Use the <Space> key to select the disks and press <Enter> key. A confirmation
sentence will appear below, and then press <Y> key to accept the selection.
Important
• You will lose all data on the RAID drives and any internal RAID structures when you
perform this operation.
• Possible reasons to "Reset Disks to Non-RAID" could include issues such as
incompatible RAID configurations or a failed volume or failed disk.
Intel RAID
[ MAIN MENU
[ RESET RAID DATA
5.
Resetting RAID disk will remove its RAID structures
and revert it to a non-RAID disk. [ DISK / VOLUME INFORMATION
WARNING : Resetting a disk causes all data on the disk to be lost.
(This does not apply to Recovery volumes)
Serial #
XXXX-XXXXXXXX XXXXXXXXXXXXXX
Serial #
XXXX-XXXXXXXX XXXXXXXXXXXXXX
XXXXXXXXXXXXXX
XXXXXXXXXXXXXX
Select the disks that should be reset.
[SPACE] - Selects
[ESC] - Exit
B-8
]
4. Recovery Volume Options
4. ] Recovery Volume Options
Exit
]
Size Status
XXX.XGB Member Disk
Size Type/Status (Vol ID)
XXX.XGB Member Disk
XXX.XGB Non-RAID Disk
XXX.XGB Non-RAID Disk
[ENTER] - Selection Complete
[ENTER] - Select Menu