Fisher & Paykel WA37T26EW Service Manual page 39

Ecosmart electronic washer
Table of Contents

Advertisement

Action:
Secondary Source: Motor Control Module.
Action:
220.
(11011100) EEPROM Model Map Not Programmed
Similar to fault code 60
Primary Fault:
Action:
221
(11011101) Motor Control Module Fault
The motor control has encountered a RAM check error
Primary Fault:
Action:
222
(11011110) Motor Control Module Fault
The motor control has encountered a Stack error
Primary Fault:
Action:
223
(11011111) Motor Control Module Fault
The motor control has encountered a program counter error
Primary Fault:
Action:
224
(11100000) Motor Control Module Fault
The motor control has encountered a peripheral error
Primary Fault:
Action:
225
(11100001) Motor Control Module Fault
The motor control has encountered a clock error
Primary Fault:
Action:
230.
(11100110) EEPROM Value out of Range
Wrong version detected
Primary Fault:
Action:
232.
(11101000) COMMS Timeout 5 Seconds
IW only problem, either the Display or Motor Control Module has not responded in time.
Primary Fault:
Action:
Secondary Fault:
1) Check that the rotating basket assembly is not jammed to the
agitator with any foreign object that may be caught under the
agitator skirt.
2) Check that the clutch teeth are not locked together with dirt, lint,
etc.
3) Make sure the basket is not overloaded with too many clothes.
4) If none of the above appears to be at fault, then check the air bell
at the bottom of the outter tub for leaks.
If the machine is empty of water at fault, it is possible that the pump
circuit is faulty and has caused a pump out during wash. This would
cause the basket to re-engage during agitate and the Motor Control
Module to display this fault. Replace Motor Control Module.
Motor Control Module.
Change Motor Control Module.
Motor Control Module.
Change Motor Control Module.
Motor Control Module.
Change Motor Control Module.
Motor Control Module.
Change Motor Control Module.
Motor Control Module.
Change Motor Control Module.
Motor Control Module.
Change Motor Control Module.
Motor Control Module is the wrong version.
Change Motor Control Module.
Display Module.
Replace Display Module.
Motor Control Module.
Action: Replace Motor Control Module.
39
479602

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wa42t26gwWa42t26gw1

Table of Contents