On Timer; Installation Menu; Select The Menu Language; Channel Menu - Magnavox 42MF237S User Manual

Note: - From now on, every week, your TV will automatically
switch to the selected channel, on the selected day,
at the selected time, until the On timer function is
switched off again.
- Only one On timer can be set.

Installation menu

TV menu
TV Settings
Features
Installation

Channel menu

TV menu
TV menu
Language
Channels
Preferences
Connections
Clock
Reset AV settings
Software upgrade
Television Installation
Installation mode
Antenna
Cable
Previous Next
On timer (applicable for off-air channels only)
&
é
"
'
(
§
è
!
ç

Select the menu language

Installation
&
Language
é
Channels
"
Preferences
'
Connections
Clock
(
Reset AV settings
Software upgrade §

Store TV channels

&
Channels
é
Autoprogram
"
Installation update
'
Weak channel install...
(
Installation mode
§
è
Please select your installation mode
!
From standby, this automatically switches the TV to the specified channel
number, at a specified time.
Select On timer.
Press the cursor right to enter the On timer menu.
Select Timer and press the cursor right.
Select On.
Select Channel and then the TV channel you want your TV to switch to on
a selected time and day.
Select Day and then a day of the week or select Daily.
Select Time and enter the time with the digit keys or with the cursor up/
down.
Press the OK key to activate.
Press the cursor left to return to the Features menu or press the MENU
key to switch off the menu.
Press the button on the remote control.
MENU
Use the cursor down to select Installation
Use the cursor right to enter the Installation menu.
Select Language and enter the list of available languages with the cursor
right.
Select your language with the cursor up/down and press the
confirm you selection.
Proceed with the Installation menu.
Select Channels in the Installation menu.
Use the cursor right to enter the Channels menu.
Select in the Channels menu.
Autoprogram
Use the cursor right to enter the Autoprogram menu.
Press the button.
OK
Select Cable or Antenna in the Installation mode.
When Antenna is selected, the TV will detect antenna signals and will
search for antenna TV (NTSC and ATSC) channels available in your local
area.
When is selected, the TV will detect cable company supplied signals
Cable
and will search for cable TV (NTSC, ATSC, QAM modulated) channels
available in your area.
Make sure that registration with your cable TV provider and connection of
equipment are completed.
Press the green button " on the remote control.
Next"
Note: All channels must be unlocked in order to autoprogram. If requested, enter
your PIN code to unlock all channels.
Press the green button " Start" to start autoprogramming.
The menu screen disappears and the progress of autoprogramming is
displayed. The progress bar indicates the number of analog and digital TV
channels found.
When Autoprogramming is complete, a message appears confirming
the completion. Press the red button "Finish" and the TV returns to the
Installation menu.
16
in the TV menu.
button to
OK