Digital Audio Connector; Front Panel Audio Connector - Asus Z170-P D3 User Manual

5. Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel
audio I/O module cable to this connector.
Z170-P D3 Front panel audio connector
•
•
6. Digital audio connector (4-1 pin SPDIF_OUT)
This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect
the S/PDIF Out module cable to this connector, then install the module to a slot
opening at the back of the system chassis.
Z170-P D3 Digital audio connector
1-18
AAFP
Z170-P D3
We recommend that you connect a high-definition front panel audio module to this
connector to avail of the motherboard's high-definition audio capability.
If you want to connect a high-definition front panel audio module to this connector,
set the Front Panel Type item in the BIOS setup to [HD]. If you want to connect an
AC'97 front panel audio module to this connector, set the item to [AC97]. By default,
this connector is set to [HD]. See section 2.6.7 Onboard Devices Configuration for
details.
Z170-P D3
PIN 1
HD-audio-compliant Legacy AC'97
pin definition compliant definition
PIN 1
SPDIF_OUT
Chapter 1: Product introduction