The Following Fault Message Appears In The Display At The End Of A Programme - Miele W 5965 WPS Operating Instructions Manual

Problem solving guide
The following fault message appears in the display at the end
of a programme
Fault message
Check hot water
inlet
Chk detergent
Hygiene information
52
Possible cause
The water inlet of the
second hose (marked
red) is blocked.
The washing machine
washed in the cold water
mode.
Excessive foam has built
up during washing.
A programme of at least
60°C has not been run for
a long period of time.
Remedy
Check whether
– the tap has been turned on
properly.
– the inlet hose is kinked.
– the water pressure is too low.
Check:
– the amount of detergent
used.
– Adjust the dosage according
to the manufacturer's
instructions on the
packaging and the degree of
soiling of the laundry.
Run the Cottons 75°C
programme with a universal
detergent to prevent the
formation of organic deposits
and unpleasant odours in the
machine.