= Note =
If the stereo signal is poor or the receiving conditions are not optimum or if
●
STEREO:MONO automatic switching occurs, it is recommended to switch
from STEREO to MONO.
Selected mode is not affected when the contents of the receiving signal
●
change.
When the receiving conditions deteriorate, listening will be easier if the
●
mode is set to the MONO position pressing the Sound Selection button.
DUAL, also known as DUAL MONO or as BILINGUAL is not currently
●
transmitted in some countries.
Digital Audio Preference
(Dolby D
/ MPEG)
Selects the initial setting for audio tracks.
Dolby
D:
The priority is given to Dolby Digital.
MPEG:
The priority is given to MPEG.
Dolby Digital is the method of coding digital signals developed by the
●
Dolby Laboratories. Apart from stereo (2ch) audio, these signals can also
be multi-channel audio.
MPEG is an audio compression method that compresses audio to the
●
smaller size without any considerable loss of audio quality.
Not valid in Analogue TV
●
- 73 -