Target-Id; 4-Tone Id - Fisher F44 Owner's Manual

Hide thumbs Also See for F44:

Table of Contents

TARGET IDENTIFICATION

This is a motion detector. The coil must be moving for the detector to sense

Target-ID

metal except when in Pinpoint. If you stop the coil over a metal object it will

null-out and go silent. When metal objects are detected, the detector will emit

a sound, a Target ID Category icon will illuminate and a 2-digit Target-ID

number will appear on the screen. Possible Target-ID numbers range from 1 to

99. This number represents the electrical conductivity of the target; higher

numbers indicate more highly conductive targets.

Target indicators on the screen only represent the last object detected. This

detector has fast target response and is able to detect different objects in very

close proximity. Therefore, the Target-ID displayed may change rapidly as you

sweep the searchcoil.

Three seconds after a target is detected, the ID numbers will time-out and

disappear and the Target Category Icon will change to the non-illuminated state.

Solid illumination of a singular target category indicates the detector is

confident of the target identification. If target-ID confidence is low, the detector

will assign several possible categories with the most likely target category solid

black and less likely target categories shaded gray.

Iron, Gold and

Silver Indicators

The group border

momentarily flashes

when an object in that group is present.

The border flashes independently of the notch settings.

Relic hunters will frequently seek out iron-laden sites as good prospective

treasure-hunting sites. The iron indicator alerts the user to the presence of

iron, even if iron has been discriminated out. Relic hunters can search free of

iron-target audio, yet still be alerted to the presence of ferrous objects or

search with no discrimination and use the FeTone™ feature to decrease the

Audio Volume of ferrous targets

The detector will provide 1 of 4 sounds for any metal object detected: a bass,

4-Tone Target Identification

low, medium or high tone. This audio feedback system is useful in conjunction

with the visual Category Icon system described above.

Table of Contents