3. Recording Modes
[One Point Color]
Set the color to leave in
∫
Set the color to leave in by selecting a location on the screen.
1
Press [Fn4] to display the setting screen.
•
Setting screen can also be displayed by touching in order of [
2
Select the color you want to leave by moving the
frame with 3/4/2/1.
•
You can also select the color you want to leave by touching
the screen.
•
Pressing [DISP.] will return the frame back to the center.
3
Press [MENU/SET] to set.
•
Depending on the subject, the set color may not be left in.
This effect leaves one selected color to emphasize
impressiveness.
Items that can be set
Amount of color left
Small amount of
color
124
Large amount of
color
] then [
].