Playback Settings - Denon AVR-X4200W Owner's Manual

Contents Connections
Upgrade (Auro-3D)
Sound mode
Front
L/R
Auro-3D S
Auro-2D Surround S
z1 The applicable sound mode includes "Dolby Surround" and sound modes that have "+Dolby Surround" in the sound mode name.
z2 The applicable sound mode includes "DTS Neural:X" and sound modes that have "+Neural:X" in the sound mode name.
z3 A signal for each channel contained in an input signal is output as audio.
z4 Audio is not output when "Speaker Config." - "Surr. Back" in the menu is set to "1 spkr". (v p. 238)
z5 Audio is output from the speakers specified in the "Surround Parameter" – "Speaker Select" settings. (v p. 191)
z6 Audio is output from the speakers specified in the "Audyssey DSX
z7 Audio is output when "Subwoofer Mode" in the menu is set to "LFE+Main". (v p. 245)
z8 You can use the Rear Height speakers instead of Surround Height speakers for Auro-3D playback. For best Auro-3D experience, using Surround Height speakers is
recommended.
Front panel Display
Playback
Surround Front
Surround
Center Back Wide
L/R
L/R L/R
D D
D D D
® " settings. (v p. 197)
Rear panel
Settings
Channel output
Front
Top Front Top Middle Top Rear
Height
L/R L/R L/R
L/R
D
311
Remote
Tips Appendix
Front Surround
Rear Surround Dolby Dolby
Height Height Atmos Atmos
L/R L/R Enabled Enabled
L/R L/R
Dz8 D
Index
Back Dolby
Atmos
Subwoofer
Enabled
L/R
D
D