Dodge VIPER User Manual page 104

E L E C T R O N I C S
DID Selectable Menu Items
• The DID can be used to select and configure which vehicle information is displayed. To
step to each main menu feature push the UP
step. A step from the last item in the list will cause the first item in the feature list to
be displayed. The following features are in the Main menu:
• Tach
• Mph/Kmh
• Vehicle Info
• Fuel Economy
• Trip A
• Trip B
NOTE:
For features in the DID that can be reset (Average Fuel Economy), the DID prompts a
reset with a RIGHT arrow button graphic and the word RESET next to it.
Key Fob Programmable Features
The following features may also be programmed by using the Key Fob transmitter or the
ignition and driver's door lock switch. Refer to "Uconnect Settings" in "Understanding
Your Instrument Panel" in the Owner's Manual on the DVD for further information.
NOTE:
Pushing the LOCK button while you are inside the vehicle will activate the Vehicle Security
Alarm. Opening a door with the Vehicle Security Alarm activated will cause the alarm to
sound. Push the UNLOCK button to deactivate the Vehicle Security Alarm.
Unlock On First Press
To unlock either the driver's side, or all doors, on the first press of the UNLOCK button:
• Push and hold the LOCK button for at least four seconds, but no longer than 10
seconds. Then, push and hold the UNLOCK button while still holding the LOCK button.
• Release both buttons at the same time.
Auto Unlock Doors On Exit
To have all of the vehicle doors unlock when any door is opened:
• Enter your vehicle and close all the doors, and fasten your seat belt.
• Cycle the ignition switch between the LOCK and ON position four times, ending in the
LOCK position (do not start the engine).
• Push the power door UNLOCK switch to unlock the doors. A single chime will indicate
that programming is complete.
102
or DOWN
• Audio
• Stored Messages
• Screen Set Up
• Performance
• Hibernate
button once for each