Attaching The Stand - Alba 22/207F Installation & Operating Instructions Manual

Attaching The Stand

To complete the stand installation you will require a cross head screw driver.
The Stand Installation pack comes with 2 sets
of screws.
fi g 1) Attach the stand neck to the rear of the TV set.
fi g 2) Secure the neck to the TV using the
3 x M (4x12) screws provided.
fi g 3) Attach the stand base to the neck.
fi g 4) Secure the base to the neck using the
4 x ST (4x12) screws provided.
HELPFUL ADVICE FOR FIRST TIME STAND INSTALLATION
When securing the self-tapping screw/s into the base of the TV (on fi rst installation) the screw/s may be
naturally tight as they create a thread in the plastic.
a) Ensure the cross head screw driver tip fi ts correctly into the head of the screw and that it is not too big
or small.
b) Screw in all screws individually and partially before tightening all of the screws fully.
c) If the screws become very tight try loosening and re-tightening, this will continue the process of creating
the thread.
For any help concerning set up and use of your TV please call the Customer Helpline on page 3
User Guide - ALB-MAN-0003 - 22-207F, 22-207FDVD, 24-207F, 24-207FDVD,W,P,S.indd Sec1:9 User Guide - ALB-MAN-0003 - 22-207F, 22-207FDVD, 24-207F, 24-207FDVD,W,P,S.indd Sec1:9
3 x M(4x12)
4 x ST(4x12)
1
3 x
M (4x12)
2
1 1/2
3
4 x ST (4x12)
4
9
22/05/2015 16:53:40 22/05/2015 16:53:40