Audio Language/Sound Mode 31 - Magnavox DVD710AT Owner's Manual

The DVD Player allows you to select a Language for DVDs or a
Sound Mode for Audio CDs.
Language
DVD
1
Press the AUDIO button during playback, then press the
o/p buttons to select the desired language.
The language can be changed only if multiple languages are avail-
able on the DVD.
AUDIO 1 : E N G / 8
AUDIO 2 : F R E / 8
AUDIO 8 : J P N / 8
HELLO
AUDIO 1
Sound Mode
AUDIO CD
1
Press the AUDIO button during playback, then press the
o/p buttons until the sound mode you want appears.
When producers record an Audio CD, they record the sound
on two channels - the left and the right. You can choose to hear
the sound on the left channel, the sound on the right channel,
or the sound on both channels (Stereo). You will select L-CH,
R-CH, or STEREO.
AUDIO S T E R E O
AUDIO R - C H
AUDIO L - C H
Press the o/p buttons.
Press the o/p buttons again.
Press the o/p buttons again.
•••
BONJOUR
AUDIO 2
Both right and left channels
are active (stereo).
Only the right channel is active.
Only the left channel is active.

Audio Language/Sound Mode 31

1
Helpful Hints
• If a desired language is not shown
after pressing the o / p buttons sev-
eral times, the DVD does not have
that language.
• The display will disappear after
about 15 seconds.
• Some DVDs only allow you to
change the language in the Disc
menu.
• When you use the DIGITAL AUDIO
OUT COAXIAL jack, the sound mode
of audio CDs cannot be changed.
OPEN/
POWER
CLOSE
TITLE MENU RETURN
STOP
ENTER
PLAY
1 2 3
4 5 6
7 8 9
0
+10
CLEAR
SETUP MODE DISPLAY
PAUSE/STILL REPEAT
SKIP SEARCH MODE A-B
AUDIO SUB TITLE ANGLE