Table of Contents
Advertisement
P
REPARATION FOR USE
ANTENNA/CABLE CONNECTIONS
Plug the incoming cable into the ANT. jack on the rear of the unit.
If your cable service supplies you with a converter box or if you use a satellite system, connect the box with
this unit as shown below.
Antenna
Cable
or
TV signal
Incoming cable from home
Antenna / Cable Company
(No Cable Box)
OR
Incoming cable from Cable Company
or Satellite Antenna
NOTE:
Before plugging the antenna into
the ANT. jack of the unit, check
that the pin is not bent. If it is bent,
straighten the pin as illustrated,
then plug the pin into the ANT. jack
of the unit.
CONNECTING TO AN EXTERNAL DEVICE (FRONT)
Use the AUDIO/VIDEO input jacks on the front of the unit when connecting your TV to an
external video device (VCR, Camcorder or Game Console).
Connect the Audio/Video output jacks of the external source to the AUDIO L/R and VIDEO
input jacks of this unit.
Then use [SELECT] or [CH. K K / L L ] until "AUX" appears on the screen.
(Refer to "TO WATCH EXTERNAL INPUT" on page 9.)
ex.
VCR or video camera, etc.
NOTE:
When you connect a monaural VCR (external source) to this unit, connect the Audio output jack of the monaural VCR
(external source) to the AUDIO L jack of this unit. The audio will output in both L and R channel equally.
6
EN
Cable Box or Satellite Box*
Bent pin
Cable
(Needs to be
straightened)
To the Audio output jacks
Audio Cable
(commercially available)
(OUT)
To the Video output jack
Video Cable
(OUT)
(commercially available)
ANT.
COAXIAL
ANT.
*NOTE
(DO NOT DISCONNECT FROM BOX)
Some cable TV systems use scrambled
signals and require a special converter to
receive these channels. Consult your local
cable company.
Plug
(Straight pin)
Rear of the unit
For your safety and to
avoid damages to the unit,
unplug the antenna cable
from the ANT. jack before
moving the unit.
[Front of the unit]
ex.
Headphone
(IN)
(IN)
• To connect a headphone
(not supplied) for personal
listening.
AUX
Hide quick links:
Advertisement
Chapters
Table of Contents
