Manual Time Adjustments - Emerson Research iC200 Owner's Manual

Manual Time Adjustments

Some people like to set their clocks 5 to 10 minutes fast to make sure that they will
always be on time. Even though the SmartSet sets the time by itself, you still have
®
the option of adjusting the time manually if you wish.
To manually adjust the time display depress and hold the Time button, and press
either the Tuning/Skip (Clock/Time) or buttons to adjust the time display
ahead or back as desired. Each press of the Tuning/Skip (Clock/Time) or
buttons will change the display by one minute.
If you hold the Tuning/Skip (Clock/Time) or buttons the display will continue
to change. The display will change slowly at first, one minute at a time. But if you
continue holding the Tuning/Skip (Clock/Time) or buttons buttons the display
will change rapidly.
NOTE: If you manually adjust the time, your new setting is entered into the
®
SmartSet memory. If the power is interrupted, the display will return to your
new setting, not the original setting, when the power is restored.
16
iC200_042007.p65 16 20/4/2007, 15:43