Honda 2007 Element Online Reference Owner's Manual page 204

Main Menu
Table of Contents
1. The front parking/turn signal light
is next to the headlight bulb. On
the driver's side, remove the front
end of the air intake duct by
pulling it out (see page
2. Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
3. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
4. Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
5. Test the lights to make sure the
new bulb is working.
6. (Driver's side)
Install the front end of the air
intake duct.
Replacing a Front Side Marker
Light Bulb
On all models except SC
198 ).
1. Place a cloth between the trim of
the lens and the body, at the top of
the lens. Remove the front side
marker light assembly by carefully
prying on the trim of the lens with
a small flat-tip screwdriver.
SCREWDRIVER
LIGHT
ASSEMBLY
CLOTH
2. Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
3. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
Lights
LIGHT ASSEMBLY
SOCKET
CONTINUED
201