Advertisement
U
4
SING THE
he TV's audio/video input jacks are for
T
direct picture and sound connections
between the TV and a VCR (or similar
device) that has audio/video output jacks.
Both the AV1 and AV2 Input Jack connec-
tions are shown on this page, but either
one can be connected alone. Follow the
easy steps below to connect your accessory
device to the AV1 and AV2 IN Jacks located
on the back of the TV.
1
Connect the VIDEO (yellow)
cable to the VIDEO AV1 IN (or
AV2 IN) jack on the back of the TV.
2
Connect the AUDIO (red and
white) cables to the AUDIO (left
and right) AV1 IN (or AV2 in) jacks
on the rear of the TV.
3
Connect the VIDEO (yellow)
cable to the VIDEO OUT jack on
the back of the VCR (either one or
two) or accessory device being used.
4
Connect the AUDIO (red and
white) cables to the AUDIO (left
and right) OUT jacks on the rear of
the VCR (either one or two) or
accessory device being used.
5
Turn the VCR (either one or
two) or accessory device and
the TV ON.
6
Press the CH + or CH- buttons
to set the TV to its AV1or AV2
channel. (Go to your lowest channel,
for example channel 1, then change
channels down to find the correct
input.)
7
With either of the VCRs (or accesso-
ry devices) ON and a prerecorded
tape (CD, DVD, etc.) inserted, press
the PLAY button to view the tape
on the television.
H
H
ELPFUL
INT
Audio and video cables are not
supplied with the TV, but are avail-
able from Magnavox or electronics
retailers.
AV1 I
AV2 I
N OR
AV1
Connection
4
S-VIDEO
ANT/CABLE
OUT
5
VCR One (or accessory
device) (Equipped with Audio
and Video Output Jacks)
AV2
Connection
S-VIDEO
ANT/CABLE
OUT
OUT
4
VCR Two (or accessory
5
device) (Equipped with
Video and Audio Output Jacks)
(I
) J
N
NPUT
ACKS
Back of TV
1
1
Monitor out
AV1 in
AV2 in
VIDEO
Y
L/Mono
Pb
AUDIO
S-VIDEO
R
Pr
COMPONENT VIDEO INPUT
2
3
R
L
VIDEO
OUT
AUDIO OUT
OUT
Back of VCR
7
Video In
(Yellow)
Audio In
(Red and
White)
R
L
VIDEO
AUDIO OUT
OUT
3
7
2
Advertisement
