Acura mdx 2016 Owner's Manual page 205

uuClimate Control SystemuUsing Automatic Climate Control
■
SYNC on and off
■
Changing the fan speed
Fan Speed Level Indicators
204
1. Select SYNC.
2. Select ON for synchronized mode.
u When in synchronized mode, the front
passenger's side temperature and the
rear passenger compartment become
the same as the driver's side settings.
3. Adjust the temperature or change the
mode from the driver's side.
1. Select .
2. Change the fan speed with one of the
following:
The fan speed level indicators: Select your
desired speed level. The smaller indicator is
for a slower speed, and the larger for a
faster speed.
+ / ( ( - : To go up or down one level at a
time.
Fan AUTO: The system automatically
selects the fan speed most suitable to the
ambient environment.
1SYNC on and off
When you press the button, the system
synchronizes the driver's and front passenger's
temperature settings.
When the system is not in SYNC mode, the driver's
side temperature, the front passenger's side
temperature and the rear passenger compartment (if
it is on) can be set separately.
You can also turn off SYNC mode by changing the
front passenger's side temperature or rear
passenger's temperature.
Models with navigation system
The system adjusts each temperature based on the
information of the sunlight sensor and the sun
position updated by the navigation system's GPS.
1Changing the fan speed
While the climate control system is in AUTO, Fan
AUTO is highlighted.