Download Print this page
Sennheiser MKE 2 digital Quick Start Manual
Sennheiser MKE 2 digital Quick Start Manual

Sennheiser MKE 2 digital Quick Start Manual

Digital microphone
Hide thumbs Also See for MKE 2 digital:

Advertisement

3B
Adjusting Input Level with
Apogee Maestro App
Open Apogee Maestro app and choose Sennheiser
X
MKE 2 digital from the main menu.
Tap the Input Monitoring button to hear your micro-
X
phone input.
1
Turn the Gain Adjustment knob to increase or decre-
ase the microphone input to the desired level. Small
adjustments can also be made by pressing either the
3
"–"or "+" buttons
.
Tips for Setting Input Level
The best way to do this is to monitor the loudest
sound you will be recording and adjust the input
gain so the input metering remains green, yellow or
orange and not red. If the microphone input meter
becomes red when recording, the input is too high
and the recording will be distorted.
4
Select an Input Processing preset. The presets use
onboard DSP processing to shape the sound with EQ,
compression and limiting to achieve the most natural
or unique result. Select No Processing or leave as is to
bypass this feature.
3C
Apple Watch Remote Control
MetaRecorder offers an Apple Watch App to remotely
operate these controls.
1
3
Tap to operate
Tap to add
transport controls.
a marker.
2
4
Force tap to toggle
Tap to reset
favorite status.
max. peak display.
4
Recording
Note:
It is recommended that you set your iOS device to
airplane mode to prevent any incoming calls from
disrupting your recordings.
Open Apogee MetaRecorder or any other Core Audio
X
compatible recording App.
MKE 2 digital should be automatically detected and
selected as the input device.
If you haven't already done so, connect headphones to
X
the built-in output on your iOS device and enable input
monitoring in the recording App.
Tap the Record button
X
Attachment of the Microphone
5
Tap "+" or "–"
to adjust input
For more info on Apogee MetaRecorder
gain.
and other compatible apps,
visit www.apogeedigital.com/apps
1
in the App to begin.
25 cm (10 inches)
Quick Start Guide
MKE 2 digital
Sennheiser electronic GmbH & Co. KG
Am Labor 1, 30900 Wedemark, Germany
www.sennheiser.com
Printed in USA, Publ. 04/15, 560098/A06

Advertisement

loading

Summary of Contents for Sennheiser MKE 2 digital

  • Page 1 Open Apogee MetaRecorder or any other Core Audio compatible recording App. MKE 2 digital should be automatically detected and selected as the input device. If you haven’t already done so, connect headphones to the built-in output on your iOS device and enable input monitoring in the recording App.
  • Page 2: System Requirements

    Apogee MetaRecorder Apogee Maestro 1. This metal wind screen Note: reduces the wind noise by a It is possible to record with MKE 2 digital using any maximum of 20 dB. Core Audio compatible App. ° Connecting to your iOS Device...

This manual is also suitable for:

Mke 2 digit