Connecting The Ac Cord - Magnavox NB500MG9 Owner's Manual

Magnavox blu-ray disc player owner's manual

Hide thumbs Also See for NB500MG9:

Service manual (73 pages)

Table Of Contents

Table of Contents

■

Audio signals output from DIGITAL OUT jack (COAXIAL)

The audio signals currently output from HDMI OUT jack will be output from DIGITAL OUT jack as well, except that

Dolby Digital signal will be output instead of Dolby Digital Plus and Dolby TrueHD, and DTS signal will be output

instead of DTS-HD.

When "Audio Mute" is selected in "HDMI Audio Out" setting, audio signals output from HDMI OUT jack will be muted

and the audio signals output from DIGITAL OUT jack changes depending on "Digital Out" setting.

To set "Digital Out" setting, select "Audio Mute" in "HDMI Audio Out" setting.

Disc type

Audio recording format

Dolby Digital

Dolby Digital Plus

Dolby TrueHD

BD-video

DTS

DTS-HD

LPCM

Dolby Digital

DVD-video

DTS

LPCM

audio CD

DTS-CD

* For BD titles with secondary or interactive audio, these audio will be output as Dolby Digital when all the conditions

listed below are met:

•

When "BD Audio Mode" setting is set to "Mix Audio Output".

•

When "HDMI Audio Out" setting is set to "Audio Mute".

•

When "Digital Out" setting is set to "Bitstream".

If BD titles do not have secondary or interactive audio, the audio will be output as shown in the table.

•

This table applies only when HDMI cable is not connected or "Audio Mute" is selected in "HDMI Audio Out" setting.

Note

•

In order to output LPCM signal from DIGITAL OUT jack while outputting the HDMI audio signal, set "BD Audio

Mode" setting to "Mix Audio Output" and set "HDMI Audio Out" setting to "HDMI Multi(LPCM)".