Table of Contents
Advertisement
Aspect Control Signal
Programmes usually contain an "Aspect Control Signal". (Widescreen signal,
Control signal through SCART / HDMI terminal)
In
Auto
mode, aspect mode will appear in the top left of the screen if a
Widescreen signal (WSS) or a Control signal through SCART (pin8) / HDMI
terminal is found. The aspect will switch to the appropriate ratio.
Watching > For best picture > Aspect
■
Available conditions
●
Terrestrial terminal (WSS only)
Valid input signal format:
DVB
PAL I
Invalid input signal format:
PAL 525/60 6.0 MHz
M.NTSC 6.0 MHz
●
Satellite terminal (WSS only)
Valid input signal format:
Freesat, Other Sat. / Satellite
●
AV1 (SCART) terminal / AV2 (VIDEO) terminals
Valid input signal format:
PAL
PAL 525/60
M.NTSC
NTSC
: Control signal through SCART (pin 8) / HDMI terminal only
- 58 -
Advertisement
Table of Contents
