ECOR HD 16F:
You can optionally install two 3.5" HDDs inside the ECOR HD 16F DVR for recording videos.
1.
Follow the first three steps above to open the DVR housing.
2.
Please install the HDD firstly on the HDD Bracket and then install the second one onto the
DVR.
2
3.
Screw a HDD onto the HDD Bracket using the supplied four short screws.
4.
Connect the internal SATA cable to the SATA port of the HDD, and connect the internal
power cable to the HDD to complete the first HDD installation (You need to connect these
cables to the second HDD before installing).
SATA Cable
1
Power Cable
12
ECOR HD 4F / 8F / 16F