Related Manuals for Samson Mediaone10S
Summary of Contents for Samson Mediaone10S
- Page 1 ACTIVE STUDIO SUBWOOFER Owner's Manual...
- Page 2 Copyright 2015 Samson Technologies Corp. 45 Gilpin Avenue Hauppauge, New York 11788-8816 Phone: 1-800-3-SAMSON (1-800-372-6766) Fax: 631-784-2201 www.samsontech.com...
-
Page 3: Important Safety Information
Important Safety Information WARNING: To Reduce the risk of the electric shock. Do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified service personnel. AVIS CAUTION: To prevent electric shock hazard, RISQUE DE CHOC ÉLECTRONIQUE - do not connect to mains power supply NE PAS OUVRIR while grille is removed. - Page 4 Important Safety Information Read these instructions. 15. This appliance shall not be exposed to dripping or splashing water and that no Keep these instructions. object filled with liquid such as vases Heed all warnings. shall be placed on the apparatus. Follow all instructions.
- Page 5 Should your speaker ever require servicing, a Return Authorization (RA) number must be obtained before shipping your unit to Samson. Without this number, the unit will not be accepted. Please call Samson at 1-800-3SAMSON (1-800-372-6766) for an RA number prior to shipping your unit.
- Page 6 MediaOne 10S Features The Samson MediaOne 10S subwoofer provide deep, tight bass and is the perfect compliment to any studio monitor system. Here are some of their main features: • 10” copolymer woofer with butyl surround • Down firing tuned bass reflex port •...
-
Page 7: Rear Panel Callouts
Rear Panel Callouts VOLUME – Controls the overall output level for the MediaOne 10S subwoofer. LOW PASS (Hz) – Adjusts the low frequency filter end range of the subwoofer from 80Hz-160Hz. This setting does not affect the signal sent to the LINE OUT jacks. POWER AUTO Sleep Switch –... - Page 8 Adding the MediaOne 10S to a Monitor System Adding a MediaOne 10S subwoofer to extend the low frequency response of your monitor system can be beneficial when mixing your music. Typically, it is best to set the subwoofer level to be equal to that of the main speakers. Because deep-bass frequencies are non-directional, it is difficult for our ears to locate the sound source, and the precise placement of the subwoofer is not as critical as the main speakers.
- Page 9 If you have active studio monitors, adding the MediaOne 10S is easy using the LINE LEVEL inputs and outputs. Below is a typical system set-up using the MediaOne 10S with a mixer and a pair of Samson MediaOne BT active studio monitors. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS...
- Page 10 Connection the Media One 10S - Speaker Level Input The MediaOne 10S can be operated using speaker level inputs and outputs. When using the MediaOne 10S at speaker level, the full range powered signal is maintained at the outputs. Below is a typical system set-up using the MediaOne 10S with a home stereo receiver and passive satellite loudspeakers.
-
Page 11: Specifications
Specifications Woofer 10”, Long Excursion Transducer Enclosure Type Bass Reflex System Enclosure Vinyl wrapped MDF cabinet with mesh grille Frequency Response 35Hz - 300Hz ±3dB Crossover Frequency 100Hz 12db/oct Linkwitz Riley Low Pass Filter 80-160Hz Output Power 100 Watts RMS <1% Line Input Connectors Unbalanced RCA Speaker Input Connectors... -
Page 12: Phone: 1-800-3-Samson
Samson Technologies Corp. 45 Gilpin Avenue Hauppauge, New York 11788-8816 Phone: 1-800-3-SAMSON (1-800-372-6766) Fax: 631-784-2201 www.samsontech.com...