Table of Contents
Advertisement
Specialty Features
Reset Button
The radio panel or LCD display may fail to func-
tion normally due to the vehicle's battery condi-
tion, and may require resetting the radio micro-
processor if:
• The vehicle has been "jump started" from a dead
battery condition
• The vehicle battery becomes very low and is
quick-charged
• The vehicle battery is removed and replaced
Should this condition occur, simply press and
release the RESET button on the radio panel
using the tip of a ball point pen. This will reset the
radio microprocessor to the original factory set-
tings. After pressing the RESET button you
should recheck to see if the radio functions nor-
mally. All station programming should remain,
but you will have to reset the clock. Should the
LCD display area show any abnormal error code,
please refer to the trouble shooting guide and
solution chart below.
Error Code Problem
ERR 1
Mechanism Problem Unknown mechanical
ERR 2
TOC Reading Error
ERR 3
Error from High
Ambient Temp.
ERR 4
Laser Focus Error
ERR 6
CD Loading Error
ERR 7
Laser Servo Error
Description
problem with the CD
mechanism.
Laser can not read the
CD disc table of
contents.
The temperature of the
mechanism is too high
to play CDs without
damaging them.
Laser pickup fails to
focus and read the disc. 2. Check disc for excessive scratches.
The loading mechanism 1. Push the reset button.
is damaged.
Laser servo is not
functional.
POWER
VOLUME
AMS
Possible Remedy
1. Eject the disc and try another.
2. Press the reset button.
3. Replace the unit.
1. Insert a different disc.
2. Check disc for excessive scratches.
3. Check disc for dirt and fingerprints.
Clean disc and reinsert.
Reduce the temperature inside the vehicle
and try to play a CD at a later time.
1. Insert a different disc.
3. Check disc for dirt and fingerprints.
Clean disc and reinsert.
4. Press the reset button.
2. Replace the unit.
1. Press the reset button.
2. Replace the unit.
LOU
1
3
2
7
Hide quick links:
Advertisement
Table of Contents
