Using The Repeat Feature; Handling The Disc - Magnadyne LS4000B Linear Series Owner's Manual

CONTROLS AND FUNCTIONS

Using the Repeat Feature:

The repeat feature has two modes of operation. A single track can be
continuously repeated or the entire disc can be continuously repeated.
Repeating Single CD Track:
Press the REPEAT button (17) one time while a CD is playing.
"REP" will be flashing in the compact disc display (15) area.
The song will repeat continuously.
REPEAT
ALL
Repeating Entire CD:
Press the REPEAT button (17) two times while a track is
playing. "REP" will be indicated on the compact disc display
(15) area. The disc will play all the way through to the last
song and then repeat to the first song continuously.
REPEAT
ALL
Cancelling Repeat Feature:
To turn off the repeat feature, press the repeat button (17) a
third time (the REP1 or REP indicator will be off in the display).
REPEAT
ALL
2x
AM 53 92 100
3x

Handling the Disc:

1. When inserting the disc, hold the disc with your thumb, middle
finger and index finger and press the center with your index finger.
2. When removing the disc, always pull at the left or right edge of
the disc until it snaps loose
from the disc hub. There are
indentations in the plastic for
your fingers at these points.
3. Always keep your discs clean
and free from scratches,
fingerprints and dirt.
130 171
6
FM 88 92 98 104 108 MHz
AM 53 92 100 130 171 x10 KHz
REPEAT R
REPEAT
INTRO PROG
ALL
TUNING
VOL
MIN MAX
A