Trailer Hitch Receiver Cover Removal - If Equipped - Dodge Durango 2015 Operating Information Manual

Trailer Hitch Receiver Cover
Removal — If Equipped
Your vehicle may be equipped with a trailer
hitch receiver cover, this must be removed to
access the trailer hitch receiver (if equipped).
This cover is located at the bottom center of the
rear fascia.
1. Turn the two locking retainers located at the
bottom of the hitch receiver cover a 1/4 turn
counterclockwise and pull bottom of the
hitch receiver cover outward (towards you).
Hitch Receiver Cover Retainers
1 — Hitch Receiver Cover
2 — Locking Retainers
2. Pull the bottom of the cover outward (to-
wards you) then downwards to disengage
the tabs located at the top of the hitch
receiver cover to remove.
Hitch Receiver Cover
To reinstall the cover after towing repeat the
procedure in reverse order.
NOTE:
Be sure to engage all tabs of the hitch
receiver cover in the bumper fascia prior to
installation.
273