Sony BRAVIA KDL-40R350C Operating Instructions Manual page 15

Advanced Settings
Dynamic Range: Compensates for
differences in the audio level
between different channels.
Note
• The effect may not function or may vary
depending on the programme regardless of
the [Dynamic Range] setting.
HE-AAC Audio Level: Adjust the HE-
AAC audio sound level.
MPEG Audio Level: Adjusts the MPEG
audio sound level.
Screen
Wide Mode
For details about wide mode, see page 9.
Auto Wide
Automatically changes the wide mode
according to the input signal from an
external equipment. To keep your setting,
select [Off].
Hint
• Even if [Auto Wide] is set to [On] or [Off], you
can always modify the format of the screen by
pressing repeatedly.
4:3 Default
Sets the default [Wide Mode] for a 4:3
input signal.
Auto Display Area
Select [On] to automatically adjusts the
display area based upon the content or
[Off] to choose from the [Display Area]
options.
Display Area
Adjusts the picture display area.
Horizontal Shift
Adjusts the horizontal position of the
picture.
Vertical Shift
Adjusts the vertical position of the picture.
PC Settings
Adjust the picture size, see page 9.
Channel Set-up
Analogue Set-up
Analogue Auto Tuning: Tunes in all the
available analogue channels. Usually
you do not need to do this operation
because the channels are already
tuned when the TV was first installed.
However, this option allows you to
repeat the process (e.g., to retune
the TV after moving house, or to
search for new channels that have
been launched by broadcasters).
Manual Programme Preset: Before
selecting [Channel]/[AFT]/[Audio
Filter]/[Skip]/[Colour System], press
PROG +/– to select the programme
number with the channel. You
cannot select a programme number
that is set to [Skip:] (page 15).
Programme/TV System:
Presets programme channels manually.
Channel:
Selects a channel number.
AFT:
Allows you to fine-tune the selected
channel manually. When [On] is
selected, the fine tuning is performed
automatically.
Audio Filter:
Improves the sound of individual
channels when distortion occurs in
mono broadcasts in TV system [B/G],
[I], [D/K] and [M].
Note
• You cannot receive stereo or dual sound
when [Low]/[High] is selected.
Skip:
Skips unused channels.
Colour System:
Select the colour system ([Auto], [PAL],
[SECAM], [NTSC3.58], [NTSC4.43] or
[PAL60]) according to the channel.
Signal Level:
Displays the signal level for programme
currently being watched.
Programme Sorting: Changes the
order in which the channels are
stored on the TV.
GB
15
GB