Bissell SpotBot 33N8 series User Manual page 11

O
perations
Manual cleaning continues
10. Press the STOP button to turn off the
SpotBot.
11. Disconnect the cleaning tool from the
vacuum flex hose by pushing down on
the button lock and pulling straight off
(do not twist tools to remove them).
12. Unplug the machine and wrap the cord
around the cord wraps. Attach the Tough
Stain Brush to the base of SpotBot. Wrap
the hose around the machine.
Storage
1.
Turn the unit OFF (O). Unplug the power
cord from the outlet. Wrap power cord
around the cord wrap.
2. Empty and rinse the dirty water/
collection tank after each use, or
when dirty water reaches the indicated
maximum fill line. To remove the tank,
lift up the dirty tank latch and pull the
tank out. Dump out the dirty water and
rinse. Replace the tank into the unit for
storage. After using the SpotBot's
automated feature, wipe the window
and brushing area with a soft cloth.
3. If you were using your SpotBot manually,
wrap the vacuum flex hose around the
unit and secure the spray trigger into the
receiver on the front of the unit.
4.
Store unit indoors at room temperature
4° to 43°C (40° to 110°F).
w w w . b i s s e l l . c a
11.
Tip:
If a significant amount of water
and solution remains in the
clean water tank, your unit can
be stored with liquid in the
clean water tank. However, if
you have added Oxy GEN2
into the clean water tank, fresh
Oxy GEN2 should be added
prior to the next use to
optimize performance.
2. 3.
Tip:
Clean out the black valve
periodically inside of the dirty
water/collection tank.
11
1 - 8 0 0 - 2 6 3 - 2 5 3 5