Summary of Contents for Kenwood triblade system pro HDM80
Page 1
English 2 - 11 TYPE HDM80 ´ ¸ ∂ instructions HEAD OFFICE: Kenwood Limited, 1-3 Kenwood Business Park, New Lane, Havant, Hampshire PO9 2NH 129043/1...
Page 2
safety Read these instructions carefully and retain for future reference. Remove all packaging and any labels. Never touch the blades while the machine is plugged in. Keep fingers, hair, clothing and utensils away from moving parts. Unplug after use and before changing attachments.
Page 3
Children should be supervised to ensure that they do not play with the appliance. Only use the appliance for its intended domestic use. Kenwood will not accept any liability if the appliance is subject to improper use, or failure to comply with these instructions.
Page 4
The correct fuse cover is whisk (if supplied) identified by colour and a whisk collar replacement may be obtained from wire whisk your Kenwood Authorised Repairer frother/foaming tool (if (see Service). supplied) If a non-rewireable plug is cut off it frother/foaming tool must be DESTROYED IMMEDIATELY.
Page 6
to use the hand blender To avoid splashing, place the You can blend soups, sauces, milk blade in the food before shakes, mayonnaise and baby food switching on. etc. Do not let liquid get above the join between the power handle and for beaker blending (if beaker blender shaft.
Page 7
hints Metal Masherpro™ (if To avoid splashing place the supplied) frother/foaming tool in the important food to be processed before Never use the masher in a saucepan switching on. Always ensure over direct heat. Always remove the that the bottom of the saucepan from the heat and allow to frother/foaming tool is fully cool slightly.
care and cleaning Some foods, e.g. carrot, may discolour the plastic. Rubbing with a Always switch off and unplug before cloth dipped in vegetable oil may cleaning. help to remove discolouration. Do not touch the sharp blades. Do not use abrasives. care and cleaning guide Item Suitable...
Part fill the beaker or a similar servicing or repairs container with warm soapy water. call Kenwood Customer Care on Plug into the power supply, then 023 9239 2333. Have your insert the hand blender shaft or soup model number (e.g.
Page 10
IMPORTANT INFORMATION FOR damaged it; CORRECT DISPOSAL OF THE it has not been modified (unless by PRODUCT IN ACCORDANCE Kenwood); WITH EC DIRECTIVE it is not second-hand; 2002/96/EC. At the end of its working life, the product it has not been used commercially;...
troubleshooting guide Problem Cause Solution The hand blender will not No Power Check hand blender operate plugged in. Hand Blender not Check attachments assembled correctly securely locked to power handle. Hand blender starts to Speed selected too low Increase speed slow or labour during processing.
Page 13
soup XL PRO L K J « ∞ L ≠ w ¥ d Ë ¢ L O r ¢ b … . ∑ ∫ « ∞ L O s . « ∞ ≠ w Å ª K ∞ ∑ W « Ø...