Cd, Radio & 3�5Mm Aux; Loading & Playing A Cd; Programming A Cd; Am/Fm Radio - GPX HC425B User Manual

CD, Radio & Aux In
Loading & Playing a CD
Note: This unit is not compatible with MP3 CDs.
1. Press the Source button to switch to CD Mode
radio mode.
2. Open the Disc door.
3. Load a CD or CD-R/RW disc into the unit,
label side facing up.
4. Close the Disc door.
5. Press the Play/Pause button to begin playing the
loaded CD. Press the Skip/Search buttons to cycle
through different tracks.

Programming a CD

1. Press the Stop button to stop the CD.
2. Press the Prog/Mem button on the remote.
3. Press the Skip/Search buttons to select a track
from the loaded CD to play first.
4. Press the Prog/Mem button again.
5. Repeat steps 3 and 4 to program tracks from the
loaded CD to play in the order they are selected.
6. Press the Play/Pause button to begin playing the
programmed CD.
7. Press the Stop button twice to cancel
the program.
8

AM/FM Radio

An AM/FM antenna is built into the music system.
Adjust the position of the unit to adjust radio reception.
1. Press the Power button to turn the unit on.
2. Press the Source button to switch to FM or AM
radio mode.
3. Press or press and hold the Skip/Tune buttons to
adjust to a radio station.

Programming Radio Stations

1. With the unit on and in AM or FM mode, press the
Tune +/− buttons to adjust to a radio station.
2. Press the Prog/Mem button on the remote or
Clock Set/Mem on the unit.
3. Press the Tune+/- to select a preset number. Up to
20 stations may be preset.
4. Press the Prog/Mem button on the remote or
Clock Set/Mem on the unit to save the stations.
5. Use the Mem + button to cycle through your
memory presets.

Connecting to Aux In

Requires a 3.5mm audio cable (not included)
1. Connect a 3.5mm audio cable to the Aux In on the
unit and the audio output/headphone jack on a
media player.
2. Press the Source button to switch to Line In mode.
3. Use the controls on the connected device to select
and play audio.