Set Up Your Device
Turn Your Device On or Off
Turn the Device On
► Press and hold the Power key until the device
starts up.
Turn the Device Off
1. Press and hold the Power key until the
Device options menu displays.
2. Tap Power off.
3. In the window that displays, tap POWER OFF.
Reset the Device
Should your device stop responding to taps or
finger gestures and you are unable to turn it off,
you can reset your device.
► Press and hold the Power key and the
Volume Down key at the same time for
more than seven seconds.
Getting Started
Configure Your Phone
When you first turn on your phone, you will need to
set up a few things.
1. As each screen is displayed, follow the
instructions on each screen to set up that
particular feature.
2. Tap NEXT, SKIP, or LATER to progress to the
next screen.
Note: Voice Assistant provides voice prompts
and descriptions of on-screen items to improve
accessibility. During setup, you can enable or disable
Voice Assistant by pressing the Home key quickly
three times (triple-press).
AT&T Ready2Go
During initial set up, the AT&T Ready2Go screen
displays. It will guide you through the basics of
setting up your device.
Follow the prompts to transfer content from an old
device, store you contacts in the AT&T Cloud, set up
accounts, and more.
If you touch not now > exit, you can set up your
device later.
To access Ready2Go at any time:
► From a Home screen, tap
AT&T Ready2Go.
6
Apps >
Set Up Your Device