Aspect - Panasonic TX-40CS520E Ehelp

Aspect

Change the aspect ratio (image size) with ASPECT.
■
To change the aspect ratio manually
1. Display Aspect Selection
2. Select the mode and press
You can also change the mode pressing ASPECT.
●
(Press repeatedly until you reach the desired mode.)
Auto:
The best ratio is selected automatically according to the "Aspect Control
Signal".
Watching > For best picture > Aspect Control Signal
16:9:
Directly displays the image at 16:9 without distortion (anamorphic).
14:9:
Displays the image at the standard 14:9 without distortion.
Just:
Displays a 4:3 image full-screen. Stretching is only noticeable at right and
left edges.
4:3:
Displays the image at the standard 4:3 without distortion.
Zoom:
Displays a 16:9 letterbox or 4:3 image without distortion.
4:3 Full:
Displays a 4:3 image enlarged horizontally to fit the screen.
For HD (High definition) signals
●
Sidecut Just:
Displays a 16:9 letterbox (anamorphic) image full-screen. Stretching is
only noticeable at right and left edges.
For HD (High definition) signals
●
Sidecut Zoom:
Displays a 16:9 letterbox (anamorphic) image full-screen without distortion.
For HD (High definition) signals
●
with ASPECT.
OK to set.
- 48 -